Stinger Semi-trailers Frequently Asked Questions:

  • Is it possible to use my existing tractors with ACCORD-Stinger® Semi-trailers? Absolutely, but you will need the d-TRAIN 5th Wheel Compound Hitch Kit®.
  • Are there any extra locks or pins needed during hook-up? No, the only physical connection remains the 5th wheel.
  • Can the same king pin setting be used with ACCORD-Stinger Semi-trailers? Indeed, there’s no need to alter the KP setting.
  • Can I apply a 60″ KP setting with an ACCORD-Stinger Semi-trailer? Certainly, ACCORD-Stinger Semi-trailers make such regulations obsolete.
  • Do I have to shift the rear bogie with an ACCORD-Stinger Semi? Not at all, ACCORD-Stinger Semi-trailers always conform to US KP/RA regulations.
  • Will there be a need to upgrade the FA rating? FA loading may actually increase with ACCORD-Stinger Semi-trailers.
  • Will the trailer keep articulating at the 5th wheel? No, the articulation takes place only at the Stinger and behind the drive axles.
  • Can a tractor combined with 63′ ACCORD-Stinger trailers mount the curb during a turn? No, the shorter forward length improves maneuverability.
  • In a jackknife situation, could the tractor hit the trailer? No, the ACCORD-Stinger would halt the tractor before any collision with the trailer.
  • Will the ACCORD 63′ Semi-trailer comply with ingress and egress rules? Yes, ACCORD Semi-trailers feature a shorter forward length.
  • Is a tandem tractor necessary with an ACCORD Semi-trailer? No, tractors equipped with d-TRAIN can be 6×2 or 6×4 models.
  • Will the air-ride pusher axle lift the trailer for hookup? Yes, the pusher axle aids in raising and lowering the trailer.
  • Will an ACCORD 63′ Semi-trailer adhere to government regulations? Yes, the length of ACCORD is designed based on 75′ OAL rigs.
  • Can a full sleeper cab (15.5′ BBC) be used legally with the 63′ ACCORD-Stinger? Yes, though the tractor BBC might be a constraining factor.
  • Will the ACCORD Semi-trailer operate at the dock? Yes, the trailer’s 63′ OAL and F/L is less than 41′ from axle to turntable.
  • Is it possible to switch to an ACCORD Semi-trailer configuration? Yes, a CKD kit can be supplied to a workshop or OEM, though licensing is required.
  • Can an ACCORD Semi-trailer enhance my fuel economy? Absolutely, according to Transport Canada studies, reducing the “GAP” by one foot can save 2.6% drag, which translates to approximately 1600+/- liters (422 gallons) of fuel per Tractor Semi-trailer annually.